01162 393 67101162 393 671

Kwik Split Tiling Tools. Kwik Supplies Ltd., 12 Barry Drive, Kirby Muxloe Leicester, LE9 2HG, United Kingdom.

My Cart

Items:  items
Value: 

Handling

Page:   <<   <  1  2  3  4   >   >>   View All (39)

P Z Slab Extractor

P Z Slab Extractor


The PZ Slab Extractor is ideal for use by contractors who need to carry out repairs by extracting slabs in many locations including shopping precincts, footways etc. The item is of robust construction which enables the high quality double sprung steel blades to be hammered into the gap between the paver joints.

Gripping width between 200mm - 610mm is easily adjusted without tools

Replacement blades for this item are the same as the SZ extractor blade! See the S Z replacement blade listing


Price:    185.00 Excluding  VAT at 20%

R E Alignment Bar

R E Alignment Bar


An essential tool for the Paving contractor the RE Alignment Bar is used to align Paving Blocks before being permanently set by the Vib. Plate.


Price:    57.00 Excluding  VAT at 20%

Replacement BLADE for RE Alignment Bar

Replacement BLADE for RE Alignment Bar


Easy change high quality special Double Sprung Steel Blade for the RE Alignment Bar.
Price shown is for one blade


Price:    17.00 Excluding  VAT at 20%

KKT Brick Handle

KKT Brick Handle


An efficient handle for carrying bricks & paving blocks. Adjustable opening from 400mm - 670mm.


Price:    57.00 Excluding  VAT at 20%

Paver Boy  PB BLOCK HANDLE

Paver Boy PB BLOCK HANDLE


The Paver Boy Block handle is an excellent hand tool used for the efficient laying of paving blocks and small slabs which cannot be lifted normally with one hand. The PB1 is for use with Paving Blocks and has an opening width of 100 - 170mm & the PB15/24 is ideal for small slabs and similar blocks opening 150mm - 240mm width


Total Price:    0.00 Excluding  VAT at 20%

Please select from drop down list

G H Rubber Hammer

G H Rubber Hammer


Used for easy alignment of paving blocks and slabs before being permanently set by the Vibrating Plate
The ergonomic long handle makes for easy use in an upright position


Price:    47.50 Excluding  VAT at 20%

PWP Pallet Cart

PWP Pallet Cart


Two variations of the PWP Pallet cart are available and both are suitable for the movement of building products that are stacked on a pallet
Position the forks of the PW 1 (carrying capacity 1400kg) & under the pallet & then attach the rear wheels.
All are lifted by a hydraulic jack.
The PW3-UK (carrying capacity 1500kg) has adjustable forks & the pallet is approached from the side
Easy movement is enhanced because all pallet carts are fitted with large rubber wheels


Total Price:    0.00 Excluding  VAT at 20%

Please select from drop down list

BZ Kerb Stone Handle

BZ Kerb Stone Handle


It is recommended that the BZ Kerb Stone Handles should be used in pairs. Perfect for use when placing Kerbs & Edging Stones and easily used for easy handling of a whole host of other related products


Price:    69.00 Excluding  VAT at 20%

Replacement GRIPPER RUBBER for BZ Kerb Stone Handle

Replacement GRIPPER RUBBER for BZ Kerb Stone Handle


Easy change Gripper Rubber for the BZ Kerb Stone Handles.
£8.00 each rubber


Price:    8.00 Excluding  VAT at 20%

VZ-1 Two Man Kerb Stone Handles

VZ-1 Two Man Kerb Stone Handles


Gripping along the length of the kerb the 2 Man VZ Lifter is perfect for easy handling of normal concrete Kerb Stones and Paving Slabs

Grips longitudinally so that it can be used in the tightest of places

No deflection of the straight line

All models are equipped with a lifting eye and have a Galvanised finish

Gripping width 485mm - 1,045mm and is easily adjusted without tools

Carrying Capacity 100kg


Price:    198.00 Excluding  VAT at 20%

Vacuum Handy model VH 1/25 and model VH 2/50

Vacuum Handy model VH 1/25 and model VH 2/50


This is a cheap solution to install non porous slabs using vacuum. The vacuum is easily produced by pressing the device down on to the slab. The suction is released by opening a simple valve using your finger

The Vacuum Handy VH 1/25 is operated by one man for the movement and laying of lightweight slabs. It provides accurate and quick installation with no gap between slabs. It's design ensures a good ergonomic working position when laying slabs. It can be used to lift prelaid slabs. The sealing ring is robust and can easily be changed in a matter of seconds without the need for glueing.
Carrying capacity for this tool is 25kg

Purchase the additional handle to make the tool into the Vacuum Handy VH 2/50 allowing for two person operation

The two man operated Vacuum Handy VH 2/50 is the same item as detailed above but is supplied with a two person handle which makes it suitable for heavier loads up to 50kg

The suction plate diameter for both models is 280mm


Total Price:    0.00 Excluding  VAT at 20%

Please select from drop down list

Vacuum Power Handy VPH 75 Lifter

Vacuum Power Handy VPH 75 Lifter


The Vacuum Power Handy VPH 75 is ideal for laying dense products such as slabs and kerbs
Powered by a 12v rechargeable battery the VPH is a vacuum suction handle with a maximum carrying capacity of 75kg
Various suction plates are available for different applications


Price:    1,273.00 Excluding  VAT at 20%

Page:   <<   <  1  2  3  4   >   >>   View All (39)